V-lock Batteries

The Godox LED1000Bi II LED Video Light Panel has a V-lock Battery Plate system, allowing you to use the device without being plugged into a power source. Using the Core SWX Hypercore NEO Slim 98Wh Lithium-Ion Battery (V-Mount) will give you enough power for approximately 3 hours. For all-day shooting, a second battery is recommended.

Design Build

The Godox LED1000Bi II Bi-Colour LED is almost square, measuring 43.0 x 46.0 x 10.0 cm, and features 1024 SMD LEDs evenly spread out. The light has a yoke bar for controlling the angle of the light and a V-lock battery plate for easy installation.

What's in the Kit

• 4 Leaf Barn doors (permanently fixed)
• Yoke Bracket
• Diffusion Filter Sheet
• AC Adaptor
• Power Cord

Temperature

The minimum color temperature is 3300K, and the maximum is 5600K. The output percentage can be adjusted from 0% to 100% for precise control.

Maximum Output

To achieve maximum light output, set the temperature to 4400K, which utilizes all the light bulbs most efficiently.

Tungsten and Daylight Output

By setting the temperature to 3300K, you will only use the Tungsten bulbs. At 5600K, only the daylight bulbs will be activated.

LCD Display

The light's dimming settings can be changed from 0% to 100% using the on-board LCD panel. Pressing down on the dimmer wheel knob allows you to change the output and color temperature settings.

Recommended Setup

For best results, it is recommended to use three lights and three stands for adequate support. You may also want to use color filters on the barn doors as part of your creative setup.